Por favor, use este identificador para citar o enlazar este ítem:
http://ipicyt.repositorioinstitucional.mx/jspui/handle/1010/2070
Mathematical modeling of a composting process in a small-scale tubular bioreactor | |
GUILLERMO VIDRIALES ESCOBAR RAUL ISRAEL RENTERIA TAMAYO Felipe Alatriste Mondragón OMAR GONZALEZ ORTEGA | |
Acceso Abierto | |
Atribución-NoComercial-SinDerivadas | |
https://doi.org/10.1016/j.cherd.2017.02.006 | |
Mathematical model Sanitization bioreactor Bioreactor design Composting process | |
"A mathematical model is presented to describe a composting process occurring in a tubular bioreactor. The mathematical model is based on heat and mass transfer phenomena under the continuum approximation. The bioreactor is divided into two phases: a gas phase and a solid–liquid phase. Between these phases, oxygen and heat are interchanged. In the solid–liquid phase, biomass growth occurs causing a change in substrate concentration as well as a change in temperature due to heat release from microbial activity. Thus the mathematical model is able to describe temperature and oxygen concentration profiles in the gas phase and temperature and biomass and substrate concentration profiles in the solid–liquid phase as a function of time and axial and radial positions. Useful information obtained from the model solution are the highest temperature that can be attained within the bioreactor and the length of high temperature conditions, which are important if sludge sanitization is the purpose of the composting process. Also a theoretical calculation of the logarithmic decimal reduction of Salmonella is presented. Using the model, a design analysis was performed to determine the effect of the main design variables in the temperature of the solid–liquid phase and the oxygen concentration in the gas phase." | |
Elsevier | |
2017 | |
Artículo | |
Guillermo Vidriales-Escobar, Raul Rentería-Tamayo, Felipe Alatriste-Mondragón, Omar González-Ortega, Mathematical modeling of a composting process in a small-scale tubular bioreactor, Chemical Engineering Research and Design, Volume 120, 2017, Pages 360-371. | |
INGENIERÍA Y TECNOLOGÍA | |
Versión aceptada | |
acceptedVersion - Versión aceptada | |
Aparece en las colecciones: | Publicaciones Científicas Ciencias Ambientales |
Cargar archivos:
Fichero | Tamaño | Formato | |
---|---|---|---|
ChemEngResDesign120(2017)360.pdf | 1.1 MB | Adobe PDF | Visualizar/Abrir |